← Back to Portal
SLP Alaska

πŸ”© Beam Clamp Inspection

Rigging & Fall Protection Anchor Inspection

⚠️ ASME B30.20 | ANSI Z359.18 | Inspect Before Each Use

πŸ“‹ Clamp & Inspector Information

πŸ“… Service Class & Periodic Inspection

ASME B30.20: monthly frequent inspection for normal service. Documented periodic inspection by a Qualified Person yearly (normal), semiannually (heavy), or quarterly (severe).

No periodic inspection date entered. A documented periodic inspection is required to establish the inspection baseline.

🏷️ Identification & Markings

Missing or illegible capacity markings or product safety labels require removal from service.

Capacity, Manufacturer & Flange Range Legible
Product Safety Labels Present & Legible

πŸ”΄ Body & Structure

CRITICAL: Cracks, distortion, heat damage, or any unauthorized weld or modification requires immediate removal from service.

No Cracks, Bends, Twists or Distortion
No Cracked Welds
No Excessive Pitting or Corrosion
No Excessive Nicks or Gouges
No Heat Damage, Arc Strikes or Weld Spatter
No Unauthorized Welds, Mods or Replacement Parts

πŸ”§ Jaws & Adjustment

Jaws must seat fully on the flange with no gap. The clamp must be rated for the actual flange width.

Jaws Not Worn, Spread, Bent or Cracked
Jaws Fully Seated on Flange, No Gap
Spindle / Screw Threads Undamaged & Clean
Lock Nut / Locking Pin Present & Engaged

πŸ”— Load Connection & Function

Pins Not Bent, Worn or Distorted
Load Eye / Attachment Point Not Elongated or Cracked
Moving Parts Operate Freely, Not Seized

πŸ—οΈ Supporting Beam

Beam Flange Free of Damage or Section Loss
Beam Capacity Verified by Qualified Person

βœ… Overall Condition & Inspection Result

πŸ“Έ Photos (0/6)
AnthroSafeβ„’ Field Driven Safety|Β© 2026 SLP Alaska, LLC
HelpFeedback