← Back to Portal
SLP Alaska

πŸ—œοΈ Plate Clamp Inspection

Below-the-Hook Lifting Device Inspection

⚠️ ASME B30.20 | OSHA 29 CFR 1926.251 | Inspect Before Each Use

πŸ“‹ Clamp & Inspector Information

Use rules: engage the lock on vertical clamps before lifting. Use horizontal clamps in pairs. Never exceed the rated capacity or grip range, and lift one plate per clamp.

πŸ“… Service Class & Periodic Inspection

ASME B30.20: monthly frequent inspection for normal service. Documented periodic inspection by a Qualified Person yearly (normal), semiannually (heavy), or quarterly (severe).

No periodic inspection date entered. A documented periodic inspection is required to establish the inspection baseline.

🏷️ Identification & Markings

Missing or illegible capacity markings, operating markings, or product safety labels require removal from service.

Capacity & Grip Range Markings Legible
Product Safety Labels Present & Legible

πŸ”΄ Body & Structure

CRITICAL: Cracks, distortion, heat damage, or any unauthorized weld or modification requires immediate removal from service.

No Cracks, Bends, Twists or Distortion
No Cracked Welds
No Excessive Pitting or Corrosion
No Excessive Nicks or Gouges
No Heat Damage, Arc Strikes or Weld Spatter
No Unauthorized Welds, Mods or Replacement Parts

🧲 Gripping Surfaces

Worn, chipped, or clogged teeth let the plate slip out of the clamp. Check against the manufacturer wear limits.

Cam & Pad Teeth Sharp, Not Worn, Chipped or Clogged
Pad / Jaw Not Worn, Cracked or Loose
At Zero Grip, Cam Fully Contacts Pad

πŸ”§ Mechanism & Locking

Cam Not Broken, Worn or Loose
Pins Not Bent, Worn or Distorted
Springs Present, Not Deformed or Broken
Lock Holds Firmly in Locked Position
Screw Threads Undamaged & Clean
Moving Parts Operate Freely, Not Seized

πŸ”— Lifting Connection

Bail / Lifting Eye Not Worn, Bent, Stretched or Cracked

βœ… Overall Condition & Inspection Result

πŸ“Έ Photos (0/6)
AnthroSafeβ„’ Field Driven Safety|Β© 2026 SLP Alaska, LLC
HelpFeedback