⛓️ Shackle Inspection

Rigging Hardware Inspection

⚠️ OSHA 29 CFR 1926.251 & ASME B30.26 Compliant | Inspect Before Each Use

Inspector Name *

Inspection Date *

Company *

Location *

Specific Location *

Quantity Inspected *

Shackle Type *

Size *

Capacity / WLL

Manufacturer

🚨 CRITICAL: Any cracks, significant wear, or distortion requires immediate removal from service. Never use a shackle that shows 10% or more wear.

No Cracks / Nicks / Gouges

No Excessive Wear / Corrosion

No Distortion / Stretching / Bending

⚠️ Never substitute a bolt for a shackle pin. Pins must be properly matched to the shackle body and fully seated.

Pin Straight (Not Bent)

Threads in Good Condition

No Excessive Wear / Corrosion

Pin Properly Secured

Cotter Pin / Nut Present (If Required)

ℹ️ All shackles must have legible capacity markings. Never use a shackle with illegible or missing WLL marking.

Capacity/WLL Marking Legible

Manufacturer Marking Present

Pin Properly Matched to Body

No Unauthorized Repairs/Modifications

Overall Condition *

Inspection Result *

✅ All Pass⚠️ Partial Pass❌ All Fail

Quantity Passed

Quantity Failed

Comments

📸 Photos (0/6)

📷 Take Photo📁 Choose Files